VFlash Turf Tape

Home > VBuild > VFlash > VFlash Turf Tape

Turf Tape

Product Description

VFlash Turf Tape is a PP-based Spunweb Non-woven fabric tape designed specifically to work with turf adhesives for seaming synthetic turf. It is waterproof and provides superior tensile strength and tear resistance, which are vital for installations of professional athletic playing fields. It is also perfectly suited as a seaming base for other synthetic turf applications, including installations of residential landscaping, playgrounds and golf courses.

Features And Benefits

  • Superior tensile and shear strength.

Where to Use

  • Interior and exterior synthetic turf installations.
  • Professional and educational synthetic sports field arenas.
  • Commercial and residential landscaping applications of synthetic turf.

Limitations

  • Install only in areas recommended by the turf manufacturer.

Product Application

  • Synthetic turf must be unrolled and acclimated per the manufacturer’s written instructions to allow reduction of internal tensions caused by packaging and transport.
  • Place VFlash Turf Tape at the turf seam line directly on the properly prepared base.
  • Select the proper turf adhesive. Refer to the adhesive’s Technical Data Sheet for complete.
  • Install turf in strict accordance with the turf manufacturer’s written instructions.
  • Note: Weights may be required on turf seams to ensure proper bonding and even thatch heights.

Note: Weights may be required on turf seams to ensure proper bonding and even thatch heights.

Surface Preparation

• All substrates must be prepared in accordance with the synthetic playing surface manufacturer for the type of intended use and must comply with current regulations and industry standards.

• All substrates must be structurally sound, dry, solid and stable.

• The substrate should be clean and free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loosely bonded toppings, loose particles, old adhesive residues, and any other substance or condition that may prevent or reduce adhesion.

• All surfaces must be level, even, flat and smooth.

Suitable Substrates

  • Properly prepared field base (per the turf manufacturer’s specifications for compaction and drainage).
  • Underlayment mat (approved by the synthetic turf manufacturer).

Product Performance Properties Laboratory Tests Results

Laboratory Test Result
Fabric TypePolypropylene (PP) Spunweb Non-woven
ColourAs per Customer requirement
Shelf Life2 Years
Storage condiEons50°F to 90°F (10°C to 32°C)
Length of the RollAs per Customer requirement
Width of the Roll4, 6, 9, 12 inches
Shopping Basket